Imi Alloys Pvt. Ltd.
Girgaon, Mumbai, Maharashtra
GST No. 27AABCI5571L1Z8
TrustSEAL Verified
Call 08048600412
80% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 5 Kilogram |
| Alloy Or Not | Is Alloy,alloyed |
| Steel Grade | Alloy Steel,m2/skd51/1.3343 |
| Dimensions | 10-1500mm |
| Special Use | Mold Steel |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Construction, Automobile Industry, Pharmaceutical / Chemical Industry |
| Range | 5mm to 500mm Dia in 100mm to 6000mm Length |
| Finish | Bright BlackPolish |
| Form | Forged Bar, Square Bar, Hex (A/F) Bar, Bush Bar, Rectangle Bar, Flat Bar |
| Shape | Round |
| Grade | ASTM A182 F5, F9, F11, F12, F22, F91 |
| Material | Alloy Steel Bar |
Alloy Steel Forged Bar:
EN Series in Grade:
High Speed Steel (HSS), HCHCR & OHNS in Grade:
Specifications:
| Popular Grades | Bohler Grade | Chemical Composition (Average value in %) | |||||||||
| C | Si | Mn | Cr | Mo | Ni | V | P | S | W | ||
| EN-52 | H-700 | 0.45 | 3.4 | 0.45 | 8.5 | -- | -- | -- | -- | -- | -- |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Construction |
| Thickness/Diameter | 3-4 inch |
| Single Piece Length | 3 meter, 6 meter |
| Size | H21 |
| Application | Manufacturing, Construction, School/College Workshop |
Applications
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Construction, Manufacturing |
| Thickness/Diameter | 3-4 inch |
| Single Piece Length | 3 meter, 6 meter |
| Material | Alloy Steel |
| Size | H21 |
| Bar Type | Flat |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Construction |
| Thickness/Diameter | 3-4 inch |
| Single Piece Length | 3 meter, 6 meter |
| Size | 21 4 N |
| Material | Alloy Steel |
Applications:
Specifications:
| Popular Grades | Bohler Grade | Chemical Composition (Average value in %) | |||||||||
| C | Si | Mn | Cr | Mo | Ni | V | P | S | W | ||
| 21/4N | H-850 | 0.52 | 0.13 | 8.8 | 20.8 | -- | 3.6 | -- | -- | -- | -- |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Construction, Automobile Industry, Oil & Gas Industry, Pharmaceutical / Chemical Industry |
| Size | D3 |
| Material | Stainless steel |
| Shape | Round |
| Popular Grades | Bohler Grade | Chemical Composition (Average value in %) | |||||||||
| C | Si | Mn | Cr | Mo | Ni | V | P | S | W | ||
| D3 | K-100 | 1.90, 2.35 | 0.10, 0.60 | 0.15, 0.60 | 11.0, 12.0 | -- | -- | -- | 0.035 Max | 0.030 Max | |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Automobile Industry, Construction, Pharmaceutical / Chemical Industry |
| Size | S7 |
| Material | Stainless steel |
| Shape | Round |
Applications
Specifications:
| Popular Grades | Bohler Grade | Chemical Composition (Average value in %) | |||||||||
| C | Si | Mn | Cr | Mo | Ni | V | P | S | W | ||
| S7 | 0.45, 0.55 | 0.20, 1.00 | 0.20, 0.90 | 3.00, 3.50 | 1.30, 1.80 | -- | 0.35 Max | 0.030 Max | 0.030 Max | -- | |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Pharmaceutical / Chemical Industry, Automobile Industry, Construction |
| Material | Alloy Steel |
| Size | S1 |
| Shape | Round |
Applications
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Manufacturing, Construction |
| Single Piece Length | 3 meter, 6 meter |
| Material | Alloy Steel |
| Usage | Manufacturing,Construction |
Applications:
Specifications:
| Popular Grades | Bohler Grade | Chemical Composition (Average value in %) | |||||||||
| C | Si | Mn | Cr | Mo | Ni | V | P | S | W | ||
| S7 | 0.45, 0.55 | 0.20, 1.00 | 0.20, 0.90 | 3.00, 3.50 | 1.30, 1.80 | -- | 0.35 Max | 0.030 Max | 0.030 Max | -- | |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Construction, Manufacturing, School/College Workshop |
| Thickness/Diameter | 3-4 inch |
| Single Piece Length | 6 meter, 3 meter |
| Size | S1 |
Applications:
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Automobile Industry, Pharmaceutical / Chemical Industry, Construction |
| Size | EN52 |
| Material | Alloy Steel |
| Shape | Round |
Applications:
Specifications:
| Popular Grades | Bohler Grade | Chemical Composition (Average value in %) | |||||||||
| C | Si | Mn | Cr | Mo | Ni | V | P | S | W | ||
| EN-52 | H-700 | 0.45 | 3.4 | 0.45 | 8.5 | -- | -- | -- | -- | -- | -- |
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Shape | Flate |
| Material | Alloy Steel |
| Single Piece Length | 6 meter, 3 meter |
| Usage | Construction, Household Repair |
Applications:
Specifications:
| Popular Grades | Bohler Grade | Chemical Composition (Average value in %) | |||||||||
| C | Si | Mn | Cr | Mo | Ni | V | P | S | W | ||
| H13 | W-302 | 0.39 | 1 | 0.4 | 5.1 | 1.3 | -- | 1 | -- | -- | -- |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Construction |
| Thickness/Diameter | >4 inch |
| Single Piece Length | 6 meter, 3 meter, 18 meter |
| Usage | Manufacturing,Construction |
Applications
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Oil & Gas Industry, Construction, Pharmaceutical / Chemical Industry, Automobile Industry |
| Material | Alloy Steel |
| Shape | Round |
Applications:
Specifications:
| Popular Grades | Bohler Grade | Chemical Composition (Average value in %) | |||||||||
| C | Si | Mn | Cr | Mo | Ni | V | P | S | W | ||
| D2 | K-110 | 1.40, 1.60 | 0.10, 0.60 | 0.15, 0.60 | 11.0, 12.0 | 0.60, 1.20 | -- | 0.25, 1.10 | 0.035 Max | 0..030 Max | -- |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Pharmaceutical / Chemical Industry, Construction |
| Size | 21 4 N |
| Material | Alloy Steel |
Applications:
Specifications:
| Popular Grades | Bohler Grade | Chemical Composition (Average value in %) | |||||||||
| C | Si | Mn | Cr | Mo | Ni | V | P | S | W | ||
| 21/4N | H-850 | 0.52 | 0.13 | 8.8 | 20.8 | -- | 3.6 | -- | -- | -- | -- |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Construction, Automobile Industry |
| Size | H13 |
| Material | Alloy Steel |
IMI Alloys Private Limited (Formally Industrial Metal (India) is Authorized dealers of GRAPHITE INDIA LIMITED (Powmex Steels Division) of their High Speed Steel , Tool Steel and Alloy Steel products & one of the reputed suppliers in tooling industry providing the highest quality products and services for one stop solution to cater to all tooling needs of our customers. With an enviable reputation for quality products we are fully equipped to carry our reputation as "HIGH SPEED STEEL LEADERS” We take pleasure in mentioning that Powmex made HSS have been widely accepted by all users of HSS, Tool Steel and Alloy Steel in cutting tools industries and also in critical application for manufacture of broaches and Hobbs, table punches and dies etc.
We at IMI Group Believes:
Specifications:
| Popular Grades | Bohler Grade | Chemical Composition (Average value in %) | |||||||||
| C | Si | Mn | Cr | Mo | Ni | V | P | S | W | ||
| H13 | W-302 | 0.39 | 1 | 0.4 | 5.1 | 1.3 | -- | 1 | -- | -- | -- |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Automobile Industry, Construction |
| Size | H21 |
| Material | Alloy Steel |
IMI Alloys Private Limited (Formally Industrial Metal (India) is Authorized dealers of GRAPHITE INDIA LIMITED (Powmex Steels Division) of their High Speed Steel , Tool Steel and Alloy Steel products & one of the reputed suppliers in tooling industry providing the highest quality products and services for one stop solution to cater to all tooling needs of our customers. With an enviable reputation for quality products we are fully equipped to carry our reputation as "HIGH SPEED STEEL LEADERS” We take pleasure in mentioning that Powmex made HSS have been widely accepted by all users of HSS, Tool Steel and Alloy Steel in cutting tools industries and also in critical application for manufacture of broaches and Hobbs, table punches and dies etc.
We at IMI Group Believes:
Additional Information:
Product Details:
| Minimum Order Quantity | 99 Kilogram |
| Application | Automobile Industry,Pharmaceutical / Chemical Industry,Oil & Gas Industry, Construction |
| Thickness/Diameter | >4 inch |
| Single Piece Length | >36 meter |
We are the Leading Manufacturer Supplier And Trader of Alloy Steel from Mumbai. We Deals all Grade of Alloy Steel.
Applications
Cutting Tool
Gauge
File
Press Tool Part
Bearing
Index Plate
Jigs & Fixture
Dental Drill
Shear Blade
Cutlery Die
Measuring Tool
Seal Ring
Roller
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Thickness/Diameter | >4 inch |
| Single Piece Length | 3 meter |
| Material | Alloy |
Applications
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Manufacturing, Construction |
| Material Grade | Alloy Steel |
| Single Piece Length | 3 meter, 6 meter |
| Thickness/Diameter | 3-4 inch |
| Size | EN52 |
| Material | Alloy Steel |
Applications:
Specifications:
| Popular Grades | Bohler Grade | Chemical Composition (Average value in %) | |||||||||
| C | Si | Mn | Cr | Mo | Ni | V | P | S | W | ||
| EN-52 | H-700 | 0.45 | 3.4 | 0.45 | 8.5 | -- | -- | -- | -- | -- | -- |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Construction, Manufacturing |
| Material Grade | Alloy Steel |
| Single Piece Length | 6 meter, 3 meter |
| Thickness/Diameter | 3-4 inch |
| Size | 21 4 N |
| Material | Alloy Steel |
Applications:
Specifications:
| Popular Grades | Bohler Grade | Chemical Composition (Average value in %) | |||||||||
| C | Si | Mn | Cr | Mo | Ni | V | P | S | W | ||
| 21/4N | H-850 | 0.52 | 0.13 | 8.8 | 20.8 | -- | 3.6 | -- | -- | -- | -- |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Grade | Nitronic 50 |
| Standard | AISI,ASTM |
| Shape | Round |
| Dimensions | Stainless Steel |
Nitronic 60 (Alloy 218) (UNS S21800) Fe 63, Cr 17, Mn 8, Ni 8.5, Si 4, N 0.13
High strength fully Austenitic alloy that resists galling and wear. Significantly lower cost to extend part life and lower maintenance. The yield strength is twice that of 304 and 316 stainless steels, in the annealed condition. Tensile strengths can be produced in excess of 200 ksi. Chloride pitting is superior to that of type 316, and the oxidation resistance is similar to type 321 at elevated temperatures, and excellent cryogenic impact strength. Valves stems, seats, and trim; fastening systems, screening, pins, bushings, roller bearings, pump shafts and rings. Food handling, medical, automotive, aerospace and nuclear. Nitronic 60 is truly an all purpose metal. This fully austenitic alloy was originally designed as a wear alloy, and subsequently has good high temperature properties for temperatures around 1800 °F. The oxidation resistance of Nitronic 60 is similar to Type 309 S.S., and far superior to Type 304S.S. The additions of Silicon and Manganese have given this alloy a matrix to inhibit wear, galling, and fretting even in the annealed condition. Higher strengths are attainable through cold working the material and are still fully austenitic after severe cold-working.
Nitronic 50 (XM-19) (UNS S20910) Fe 57, Cr 22, Ni 13, Mn 5, Mo 2, Si 1
High strength Austenitic with superior corrosion resistance to types 316 and 316L, with approximately twice the yield strength in the annealed condition. Also fully Austenitic, this alloy stays non-magnetic when severely cold reduced. Cryogenic properties are also outstanding as well as elevated temperatures. Pumps, valves, fittings, fasteners, cables, chains, wire cloth, marine hardware, shafts, and springs.Nitronic 50 Stainless Steel provides a combination of corrosion resistance and strength not found in any other commercial material available in its price range. This austenitic stainless has corrosion resistance greater than that provided by Types 316 and 316L, plus approximately twice the yield strength at room temperature. In addition, Armco Nitronic 50 Stainless has very good mechanical properties at both elevated and sub-zero temperatures. And, unlike many austenitic stainless steels, Nitronic 50 does not become magnetic when cold worked.
Low alloy version of NITRONIC 60, primarily used for abrasion resistance only.Corrosion and abrasion resistant, tough and durable, Nitronic 30 is the stainless steel for your abrasive needs. Ball mill tests have shown that many application standards, such as AR 500 suffer six to seven times as much metal loss as Nitronic 30.Economical, low alloy, corrosion resistant, abrasion resistant stainless steel. This is a popular replacement for carbon steel, due to the resistance to outside weather conditions.
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Construction,Manufacturing |
| Single Piece Length | 3 meter,6 meter |
| Thickness/Diameter | 3-4 inch |
| Size | D2 |
| Material | Alloy Steel |
| Shape | Round |
Applications:
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Construction |
| Single Piece Length | >36 meter |
| Thickness/Diameter | >4 inch |
| Shape | Round |
Applications:
Specifications:
| Popular Grades | Bohler Grade | Chemical Composition (Average value in %) | |||||||||
| C | Si | Mn | Cr | Mo | Ni | V | P | S | W | ||
| D3 | K-100 | 1.90, 2.35 | 0.10, 0.60 | 0.15, 0.60 | 11.0, 12.0 | -- | -- | -- | 0.035 Max | 0.030 Max | |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Manufacturing, Construction |
| Single Piece Length | 6 meter, 3 meter |
| Thickness/Diameter | 3-4 inch |
| Size | H13 |
| Material | Alloy Steel |
| Shape | Round |
Applications:
Specifications:
| Popular Grades | Bohler Grade | Chemical Composition (Average value in %) | |||||||||
| C | Si | Mn | Cr | Mo | Ni | V | P | S | W | ||
| H13 | W-302 | 0.39 | 1 | 0.4 | 5.1 | 1.3 | -- | 1 | -- | -- | -- |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Construction |
| Material Grade | Alloy Steel |
| Single Piece Length | 6 meter, 3 meter |
| Thickness/Diameter | 2-3 inch |
| Size | H21 |
| Material | Alloy Steel |
We are the Leading Manufacturer Supplier And Trader of Alloy Steel from Mumbai. We Deals all Grade of Alloy Steel.
Applications:
Cutting Tool
Gauges
Files
Press Tool Parts
Bearings
Index Plates
Jigs & Fixtures
Dental Drills
Shear Blades
Cutlery Dies
Measuring Tools
Seal Rings
Rollers
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Usage | Manufacturing, Household Repair |
| Size/Diameter | 4 inch |
| Single Piece Length | 3 meter, 6 meter |
Monel Alloy 400 (UNS N04400) Ni 66.5 Cu 31.5
High strength, good weldability, excellent corrosion resistance over wide range of temperatures and conditions. Valves, pumps, shafts, marine fixtures, fasteners, electrical, and electronic components, processing equipment, petroleum refining and production equipment, feed water heaters and other heat exchangers. The alloy is widely used in the chemical, oil and marine industries. A Nickel-Copper alloy, resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a nickel-copper alloy with excellent corrosion resistance in a wide variety of media. The alloy is characterized by good general corrosion resistance, good weld ability and moderate to high strength.
Monel Alloy R-405 (UNS N04405) Ni 66.5 Cu 31.5 S 0.04
High strength, good weldability, excellent corrosion resistance over wide range of temperatures and conditions. Valves, pumps, shafts, marine fixtures, fasteners, electrical, and electronic components, processing equipment, petroleum refining and production equipment, feed water heaters and other heat exchangers. Solid solution strengthened alloy with high strength and toughness over a wide range of temperatures. Corrosion resistant and oxidation resistant to 1000 °F. Controlled sulfur added for improved machinability over alloy 400. Water meter parts, screw machine products, fasteners, valve parts.
Monel Alloy K-500 (UNS N05500) Ni 65.5 Cu 29.5 Al 2.7, Ti 0.6
Age-hardenable version of MONEL alloy 400 for increased strength and hardness. Good strength and ductility from -423 to 1200 °F. Pump shafts, doctor blades and scrapers, oil-well drill collars and instruments, electronic components, springs, valve trim, fasteners. Age-hardenable Nickel-Copper alloy which combines the corrosion resistance of Alloy 400 with high strength corrosion fatigue and erosion resistance. Alloy K-500 is a nickel-copper alloy, precipitation hardenable through additions of aluminum and titanium. This alloy retains the excellent corrosion resistant characteristics of 400 and has enhanced strength and hardness after precipitation hardening when compared with 400. Alloy K-500 has approximately three (3) times the yield strength and double the tensile strength when compared with 400. K-500 can be further strengthened by cold working before the precipitation hardening. Typical application for the alloy which takes advantage of high strength and corrosion resistance are pump shafts, impellers, propeller shafts, valve components for ships and offshore drilling towers, bolting, oil well drill collars and instrumentation components for oil and gas production. It is particularly well suited for centrifugal pumps in the marine industry because of its high strength and low corrosion rates in high-velocity seawater.
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Construction, Manufacturing |
| Single Piece Length | 3 meter, 6 meter |
| Thickness/Diameter | 3-4 inch |
| Size | S7 |
Applications:
Specifications:
| Popular Grades | Bohler Grade | Chemical Composition (Average value in %) | |||||||||
| C | Si | Mn | Cr | Mo | Ni | V | P | S | W | ||
| S7 | 0.45, 0.55 | 0.20, 1.00 | 0.20, 0.90 | 3.00, 3.50 | 1.30, 1.80 | -- | 0.35 Max | 0.030 Max | 0.030 Max | -- | |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Application | Manufacturing, Construction |
| Material Grade | Alloy Steel |
| Single Piece Length | >36 meter |
| Thickness/Diameter | >4 inch |
Applications:
Additional Information:
